2-24A test group performs tests when the system time is between the start time and the end time (the starttime plus test duration). If the system time is behind the start time when you execute the nqaschedule command, a test is started when the system time reaches the start time. If the system timeis between the start time and the end time, a test is started at once. If the system time is ahead of theend time, no test is started. To view the current system time, use the display clock command.Configuration prerequisitesBefore scheduling an NQA test group, make sure:z Required test parameters corresponding to a test type have been configured;z For a test that needs the cooperation with the NQA server, configuration on the NQA server hasbeen completed.Scheduling an NQA test groupFollow these steps to schedule an NQA test group:To do… Use the command… RemarksEnter system view system-view —Schedule an NQA test groupnqa schedule admin-nameoperation-tag start-time{ hh:mm:ss [ yyyy/mm/dd ] | now }lifetime { lifetime | forever }RequiredConfigure the maximum number oftests that the NQA client cansimultaneously performnqa agent max-concurrentnumberOptional2 by defaultz After an NQA test group is scheduled, you cannot enter the test group view or test type view.z A started test group or a test group that has completed tests will not be influenced by the systemtime change; only a test group that is waiting to perform tests will be influenced by the systemtime change.Displaying and Maintaining NQATo do… Use the command… RemarksDisplay history records of NQA testoperation informationdisplay nqa history [ admin-nameoperation-tag ]Display the results of the last NQA test display nqa result [ admin-nameoperation-tag ]Available in anyview
