2-34Send operation times: 1 Receive response times: 1Min/Max/Average round trip time: 50/50/50Square-Sum of round trip time: 2500Last succeeded probe time: 2007-11-22 10:24:41.1Extended results:Packet lost in test: 0%Failures due to timeout: 0Failures due to disconnect: 0Failures due to no connection: 0Failures due to sequence error: 0Failures due to internal error: 0Failures due to other errors: 0Packet(s) arrived late: 0# Display the history of SNMP tests.[DeviceA] display nqa history admin testNQA entry(admin admin, tag test) history record(s):Index Response Status Time1 50 Timeout 2007-11-22 10:24:41.1TCP Test Configuration ExampleNetwork requirementsAs shown in Figure 2-10, use the NQA TCP function to test the time for establishing a TCP connectionbetween Device A and Device B. Port 9000 is used.Figure 2-10 Network diagram for TCP testsConfiguration procedure1) Configure Device B# Enable the NQA server and configure the listening IP address as 10.2.2.2 and port number as 9000. system-view[DeviceB] nqa server enable[DeviceB] nqa server tcp-connect 10.2.2.2 90002) Configure Device A# Create a TCP test group and configure related test parameters. system-view[DeviceA] nqa entry admin test[DeviceA-nqa-admin-test] type tcp[DeviceA-nqa-admin-test-tcp] destination ip 10.2.2.2[DeviceA-nqa-admin-test-tcp] destination port 9000# Enable the saving of history records.[DeviceA-nqa-admin-test-tcp] history-record enable[DeviceA-nqa-admin-test-tcp] quit# Enable TCP test.
