17Connecting the power cordConnecting the AC power module1. Insert the female connector of the AC power cord supplied with the power module into thepower receptacle on the power module.2. Use a cable tie to secure the power cord to the handle of the power module, as shown in Figure20.3. Connect the other end of the power cord to an AC power outlet.Figure 20 Connecting the LSVM1AC300 power module on the S6520-52QF-EI switch(1) Cable tie(2) Tighten the cable tie to secure the power cord to the handle of the power moduleConnecting the DC power module1. Unpack the DC power cord, identify the plug for connecting to the power module, orient the plugwith the power receptacle on the power module, and insert the plug into the receptacle(see Figure 21).The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plugrather than use excessive force to push it in.2. Use a cable tie to secure the power cord to the handle of the power module, as shown in Figure20.3. Connect the other end of the power cord to the DC power source.Figure 21 Connecting the LSVM1DC300 power module on the S6520-52QF-EI
