4110-GE SFP+transceivermoduleCentralwavelength(nm)Connector FiberdiameterMultimodefiber modalbandwidth(MHz × km)MaxtransmissiondistanceSFP-XG-LX-SM1310 1310 nm LC Single-mode,9/125 μm N/A 10 km (6.21 miles)SFP-XG-LX-SM1310-E 1310 nm LC Single-mode,9/125 μm N/A 10 km (6.21 miles)Table 9 10-GE SFP+ cables available for the SFP+ portsCable model Cable lengthLSWM1STK 0.65 m (2.13 ft)LSWM2STK 1.2 m (3.94 ft)LSWM3STK 3 m (9.84 ft)LSTM1STK 5 m (16.40 ft)Figure 44 10-GE SFP+ cable(1) Connector (2) Pull latchNOTE:• As a best practice, use H3C SFP/SFP+ transceiver modules and SFP+ cables for the SFP+ports on the switch.• The H3C SFP/SFP+ transceiver modules and SFP+ cables are subject to change over time. Forthe most recent list of H3C SFP/SFP+ transceiver modules and SFP+ cables, contact your H3Csales representative or technical support engineer.For the specifications of H3C SFP/SFP+ transceiver modules and SFP+ cables, see H3CTransceiver Modules and Network Cables Installation Guide.QSFP+ portThe S6520-42QF-EI and S6520-52QF-EI switches provide QSFP+ ports. You can install QSFP+transceiver modules in Table 10, QSFP+ cables in Table 11, and QSFP+ to SFP+ cables in Table 12in the QSFP+ ports as needed.