30Figure 40 Serial console cableTable 6 Serial console port signaling and pinoutRJ-45 Signal DB-9 Signal1 RTS 8 CTS2 DTR 6 DSR3 TXD 2 RXD4 SG 5 SG5 SG 5 SG6 RXD 3 TXD7 DSR 4 DTR8 CTS 7 RTSTo connect the switch to a configuration terminal (for example, a PC) through the serial consolecable:1. Plug the DB-9 female connector of the serial console cable to the serial port of the PC.2. Connect the RJ-45 connector to the serial console port of the switch.Connecting the micro USB console cableA micro USB console cable has a micro USB Type B connector at one end to connect to the microUSB console port of the switch, and a standard USB Type A connector at the other end to connect tothe USB port on the PC.To connect to the PC through the micro USB console cable:1. Connect the standard USB Type A connector to the USB port of the PC.2. Connect the micro USB Type B connector to the micro USB console port of the switch.3. Click the following link, or copy it to the address bar on the browser to log in to download pageof the USB console driver, and download the driver.http://www.h3c.com.hk/Technical_Support___Documents/Software_Download/Other_Product/USB_Console/USB_Console/4. Select a driver program according to the operating system you use:{ XR21V1410_XR21B1411_Windows_Ver1840_x86_Installer.EXE—32-bit operatingsystem.{ XR21V1410_XR21B1411_Windows_Ver1840_x64_Installer.EXE—64-bit operatingsystem.5. Click Next on the installation wizard.Main label18 B sideBPin 9Pin 1A sideA
