66Appendix C Ports and LEDsPortsConsole portThe switch has two console ports: a serial console port and a micro USB console port.Table 18 Console port specificationsItem Serial console port Micro USB console portConnector type RJ-45 Micro USB Type BCompliant standard EIA/TIA-232 USB 2.0Transmission baud rate 9600 bps (default) to 115200 bpsServices• Provides connection to an ASCIIterminal.• Provides connection to the serial portof a local PC running terminalemulation program.Provides connection to the USB portof a local PC running terminalemulation program.Management Ethernet portThe switch provides a management Ethernet port on the front panel. You can connect this port to aPC or management station for loading and debugging software or remote management.Table 19 Management Ethernet port specificationsItem SpecificationConnector type RJ-45Connector quantity 1Port transmission rate • 10/100 Mbps, half/full duplex, MDI/MDI-X autosensing• 1 Gbps, full duplex, MDI/MDI-X autosensingTransmission medium and maxtransmission distance 100 m (328.08 ft) over category-5 twisted pair cableFunctions and services Switch software and Boot ROM upgrade, network managementUSB portThe switch has one OHC-compliant USB2.0 port that can upload and download data at a rate up to480 Mbps. You can use this USB port to access the file system on the flash of the switch, for example,to upload or download application and configuration files.NOTE:USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee thecorrect operation of USB devices from all vendors on the switch. If a USB device fails to operate onthe switch, replace it with one from another vendor.
