73Figure 73 40G QSFP+ to SFP+ cable(1) QSFP+ module (2) QSFP+ side pull tab(3) SFP+ side pull tab (4) SFP+ moduleIMPORTANT:You can use a QSFP-40G-SR4-MM850 or QSFP-40G-CSR4-MM850 transceiver module toconnect a QSFP+ port to four SFP+ ports. The QSFP+ transceiver module and SFP+ transceivermodules to be connected must be the same in specifications, including central wavelength and fibertype.NOTE:• As a best practice, use H3C QSFP+ transceiver modules, QSFP+ cables, or QSFP+ to SFP+cables for the QSFP+ ports on the switch. The H3C QSFP+ transceiver modules, QSFP+ cables,and QSFP+ to SFP+ cables available for the QSFP+ ports are subject to change over time. Forthe most recent list of QSFP+ transceiver modules, QSFP+ cables, and QSFP+ to SFP+ cablesavailable for the QSFP+ ports, contact H3C Support or marketing staff.• For more information about H3C QSFP+ transceiver modules, QSFP+ cables, and QSFP+ toSFP+ cables, see H3C Transceiver Modules User Guide.10/100/1000BASE-T autosensing Ethernet portAn LSPM4G4T6P interface module provides 10/100/1000BASE-T autosensing Ethernet ports.Table 29 10/100/1000BASE-T autosensing Ethernet port specificationsItem SpecificationConnector type RJ-45Interface attributes • 10/100 Mbps, full/half duplex, MDI/MDI-X, auto-sensing• 1 Gbps, full duplex, MDI/MDI-X, auto-sensingMax transmission distance 100 m (328.08 ft)Transmission medium Category-5 (or above) twisted pair cableStandards IEEE 802.3i, 802.3u, 802.3ab3412
