H3C S7500 Series Command Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Operation manual Command manual

H3C S7500 Series Command Manual Manual pdf 12 page image

Command Manual – System Maintenance and DebuggingH3C S7500 Series Ethernet SwitchesChapter 1 Basic System Configurationand Debugging Commands1-10SRPG 1: uptime is 0 weeks,0 days,0 hours,23 minutesH3C S7500 with 1 MPC8245 Processor256M bytes SDRAM32768K bytes Flash Memory512K bytes NVRAM MemoryPCB Version : VER.BBootROM Version : 530CPLD Version : 004Second CPLD Ver : 005Software Version : S7506R-3135Patch Version : NoneLPU 1: uptime is 0 weeks,0 days,0 hours,21 minutesH3C S7500 LPU with 1 MPC8241 Processor128M bytes SDRAM0K bytes Flash Memory0K bytes NVRAM MemoryPCB Version : VER.BBootROM Version : 510CPLD Version : 002Software Version : S7506R-3135Patch Version : None1.3 System Debugging Commands1.3.1 debuggingSyntaxdebugging { all [ timeout interval ] | module-name debugging-option }undo debugging { all | module-name debugging-option }ViewUser viewParametersall: Enables or disables all debugging.timeout interval: Sets the timeout time for all debugging, in the range of 1 to 1,440 (inminutes). After the setting, all debugging is valid in the specified period which startsfrom the time when the debugging is enabled. After the period, all debugging will bedisabled.module-name: Module name.debugging-option: Debugging option.