H3C S7500 Series Command Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Operation manual Command manual

H3C S7500 Series Command Manual Manual pdf 34 page image

Command Manual – System Maintenance and DebuggingH3C S7500 Series Ethernet Switches Chapter 3 Device Management Commands3-14Examples# Set the interval for detecting error packets to 50 seconds. system-viewSystem View: return to User View with Ctrl+Z.[H3C] qe monitor errpkt check-time 503.1.19 qe monitor overflow-thresholdSyntaxqe monitor overflow-threshold thresholdViewSystem viewParametersthreshold: Integer that sets the overall traffic threshold, ranging from 0 to 4294967295(in bps).DescriptionUse the qe monitor overflow-threshold command to specify the overall trafficthreshold used in queue traffic monitoring.The overall traffic threshold defaults to 300,000,000 bps (300 Mbps).With queue traffic monitoring enabled, the switch monitors the queue traffic andrelieves blocks in the output queue of its interfaces.The criterion used to distinguish a block is that the queue is full and the traffic of thecorresponding interface is less than the specified threshold.Examples# Set the overall traffic threshold used in queue traffic monitoring to 90 Mbps. system-viewSystem View: return to User View with Ctrl+Z.[H3C] qe monitor overflow-threshold 900000003.1.20 rdramSyntaxrdram { enable | disable }ViewSystem view