H3C S7500 Series Command Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Operation manual Command manual

H3C S7500 Series Command Manual Manual pdf 24 page image

Command Manual – System Maintenance and DebuggingH3C S7500 Series Ethernet Switches Chapter 3 Device Management Commands3-4ParametersNoneDescriptionUse the display boot-loader command to display the APP file that is adopted when theswitch boots this time and next time.Examples# Display the APP that will be adopted when the switch reboots. display boot-loaderThe primary app to boot of board 0 at the next time is: flash:/ccc.appThe backup app to boot of board 0 at the next time is: flash:/ddd.appThe app to boot of board 0 at this time is: flash:/ccc.appTable 3-1 Description on the fields of the display boot-loader commandField DescriptionThe primary app to boot of board 0 at thenext timePrimary boot file used by the device forreboot next timeThe backup app to boot of board 0 at thenext timeBackup boot file used by the device forreboot next timeThe app to boot of board 0 at this time Boot file used by the device for boot thistime3.1.6 display cpuSyntaxdisplay cpu [ slot slot-number ]ViewAny viewParametersslot slot-number: Specifies a slot. The CPU status of the card on the slot is to bedisplayed.DescriptionUse the display cpu command to display the CPU usage of a specified switch.Examples# Display the CPU usage of the card on slot 0 of the switch.