H3C S7500 Series Operation Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Operation manual Command manual

H3C S7500 Series Operation Manual Manual pdf 21 page image

Operation Manual – MSTPH3C S7500 Series Ethernet Switches Chapter 1 MSTP Configuration1-19To do ... Use the command ... RemarksEnter system view system-view —Configure themaximumtransmitting speedfor specified portsstp interface interface-listtransmit-limit packetnumRequiredThe maximum transmittingspeed of all Ethernet ports ona switch defaults to 10.II. Configuration procedure (in Ethernet port view)Follow these steps to configure the maximum transmitting speed in Ethernet port view:To do ... Use the command ... RemarksEnter system view system-view —Enter Ethernet portviewinterface interface-typeinterface-number —Configure themaximumtransmitting speedstp transmit-limitpacketnumRequiredThe maximum transmittingspeed of all Ethernet ports ona switch defaults to 10.As the maximum transmitting speed parameter determines the number of theconfiguration BPDUs transmitted in each Hello time, set it to a proper value to avoidMSTP from occupying too many network resources. The default value isrecommended.III. Configuration example# Set the maximum transmitting speed of Ethernet2/0/1 to 15.1) Configure the maximum transmitting speed in system view. system-view[H3C] stp interface ethernet2/0/1 transmit-limit 152) Configure the maximum transmitting speed in Ethernet port view. system-view[H3C] interface ethernet2/0/1[H3C-Ethernet2/0/1] stp transmit-limit 151.2.11 Edge Port ConfigurationEdge ports are ports that neither directly connects to other switches nor indirectlyconnects to other switches through network segments. After a port is configured as anedge port, rapid transition is applicable to the port. That is, when the port changes fromblocking state to forwarding state, it does not have to wait for any delay.You can configure a port as an edge port in the following two ways.

/ 47

Related manuals for H3C S7500 Series

H3C S7500 Series Operation Manual

This manual is suitable for:

S7500 Series

manualsdatabase

Your AI-powered manual search engine