H3C S9500 Series Command Manual

Also see for S9500 Series: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

H3C S9500 Series Command Manual Manual pdf 34 page image

Command Manual – RPRH3C S9500 Series Routing Switches Chapter 1 RPR Port Configuration Commands1-32Caution:GE RPR ports do not support MPLS precedence mapping and IP precedencemapping.Examples# Configure tag priorities 6 and 7 as class A service, priorities 2, 3, 4 and 5 as class Bservice, and priorities 0 and 1 as class C service. system-view[H3C] interface RprPos3/1/1[H3C-RprPos3/1/1] rpr cos-precedence-map tag 2 2 1 1 1 1 0 01.1.22 rpr default-rsSyntaxrpr default-rs { ringlet0 | ringlet1 }ViewRPR logical interface viewParametersringlet0: Transports broadcast, multicast and Flooding packets over Ringlet0.Ringlet1: Transports broadcast, multicast and Flooding packets over Ringlet1.DescriptionUse the rpr default-rs command to configure the default RPR ring ID. Broadcast,multicast and Flooding packets are transmitted in the default ring. Note that the defaultring selection is the sending sub-ring.Examples# Configure the default RPR ring ID as Ringlet0. system-view[H3C] interface RprPos2/1/1[H3C-RprPos2/1/1] rpr default-rs ringlet0

/ 65

Related manuals for H3C S9500 Series

H3C S9500 Series Command Manual

This manual is suitable for:

S9500 Series

manualsdatabase

Your AI-powered manual search engine