121Congestion avoidance configurationcommandsWRED configuration commandsdisplay qos wred interfaceSyntaxdisplay qos wred interface [ interface-type interface-number ] [ | { begin | exclude | include }regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface-type interface-number: Specifies an interface by its type and number.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see the Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.DescriptionUse the display qos wred interface command to display the WRED configuration and statistics of aninterface.If no interface is specified, this command displays the WRED configuration and statistics of all theinterfaces.Examples# Display the WRED configuration and statistics of GigabitEthernet 1/0/1. display qos wred interface gigabitethernet 1/0/1Interface: GigabitEthernet1/0/1Current WRED configuration:Exponent: 9 (1/512)Precedence Low High Discard Random TailLimit Limit Probability Discard Discard-----------------------------------------------------------0 10 30 10 0 0
