78NOTE:GTS for software forwarding does not support IPv6.Related commands: acl.Examples# Shape the packets matching ACL 2001 on GigabitEthernet 1/0/1. The GTS parameters are as follows:CIR is 200 kbps, CBS is 50000 bytes, EBS is 0, and the maximum buffer queue length is 100. system-view[Sysname] interface gigabitethernet 1/0/1[Sysname-GigabitEthernet1/0/1] qos gts acl 2001 cir 200 cbs 50000 ebs 0 queue-length 100Line rate configuration commandsdisplay qos lr interfaceSyntaxdisplay qos lr interface [ interface-type interface-number ] [ | { begin | exclude | include }regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface-type interface-number: Specifies an interface by its type and number.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see the Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.DescriptionUse the display qos lr interface command to view the line rate configuration information and operationalstatistics on a specified interface or all the interfaces.If no interface is specified, this command displays the line rate configuration information and operationalstatistics on all the interfaces.If a VT interface is specified, this command displays QoS line rate information of all VA interfacesinheriting the VT interface, but does not display QoS information about the VT interface.Examples# Display the line rate configuration information and operational statistics on all the interfaces. display qos lr interfaceInterface: GigabitEthernet1/0/1
