217Step Command Remarks3. (Optional.) Configureforced aging.a. Exit to user view:quitb. Age out NetStream entries:reset ip netstream statisticsN/AConfiguring the NetStream data exportConfiguring the NetStream traditional data exportStep Command Remarks1. Enter system view. system-view N/A2. Specify a destination hostfor NetStream traditionaldata export.ip netstream export hostip-address udp-port [ vpn-instancevpn-instance-name ]By default, no destination host isspecified. No NetStream traditionaldata is exported.3. (Optional.) Specify thesource interface forNetStream data packetssent to NetStream servers.ip netstream export sourceinterface interface-typeinterface-numberBy default, no source interface isspecified for NetStream data packets.The packets take the primary IP addressof the output interface as the source IPaddress.4. (Optional.) Limit the dataexport rate. ip netstream export rate rate By default, the data export rate is notlimited.Configuring the NetStream aggregation data exportNetStream aggregation is implemented by software.Configuration restrictions and guidelinesWhen you configure the NetStream aggregation data export, follow these restrictions and guidelines:• Configurations in NetStream aggregation mode view apply only to the NetStream aggregationdata export, Configurations in system view apply to the NetStream traditional data export. Ifconfigurations in NetStream aggregation mode view are not provided, the configurations in systemview apply to the NetStream aggregation data export.• If the version 5 format is configured to export NetStream data, NetStream aggregation data exportuses the version 8 format.Configuration procedureTo configure the NetStream aggregation data export:Step Command Remarks1. Enter system view. system-view N/A
