218Step Command Remarks2. Enter NetStreamaggregation mode view.ip netstream aggregation { as |destination-prefix | prefix |prefix-port | protocol-port |source-prefix | tos-as |tos-bgp-nexthop |tos-destination-prefix | tos-prefix |tos-protocol-port | tos-source-prefix }N/A3. Specify a destinationhost for NetStreamaggregation dataexport.ip netstream export host ip-addressudp-port [ vpn-instancevpn-instance-name ]By default, no destination host isspecified.If you expect only NetStreamaggregation data, specify thedestination host only in the relatedNetStream aggregation mode view.4. (Optional.) Specify thesource interface forNetStream data packetssent to NetStreamservers.ip netstream export source interfaceinterface-type interface-numberBy default, no source interface isspecified for NetStream datapackets. The packets take the primaryIP address of the output interface asthe source IP address.Source interfaces in differentNetStream aggregation mode viewscan be different.If no source interface is configured inNetStream aggregation mode view,the source interface configured insystem view applies.5. Enable NetStreamaggregation. enable By default, NetStream aggregation isdisabled.Displaying and maintaining NetStreamExecute display commands in any view and reset commands in user view.Task CommandDisplay NetStream entry information in the cache(in standalone mode). display ip netstream cache [ slot slot-number ] [ verbose ]Display NetStream entry information in the cache(in IRF mode).display ip netstream cache [ chassis chassis-number slotslot-number ] [ verbose ]Display information about the NetStream dataexport. display ip netstream exportDisplay the configuration and status of theNetStream templates (in standalone mode). display ip netstream template [ slot slot-number ]Display the configuration and status of theNetStream templates (in IRF mode).display ip netstream template [ chassis chassis-number slotslot-number ]Age out and export all NetStream data, andclear the cache. reset ip netstream statistics
