307name of the policy must be https_redirect. For more information about SSL server policyconfiguration, see SSL configuration in Security Configuration Guide.ProcedureTo configure the parameters for a local portal Web service:Step Command Remarks1. Enter system view. system-view N/A2. Create an HTTP- orHTTPS-based local portalWeb service and enter itsview.portal local-web-server { http |https ssl-server-policypolicy-name }By default, no local portal Webservice exists.3. Specify the defaultauthentication page file forthe local portal Web service.default-logon-page filenameBy default, no defaultauthentication page file isspecified for the local portal Webservice.To provide local portal Webservice for users, you must usethis command to specify acustomized authentication pagefile as the default authenticationpage file.4. (Optional.) Configure thelistening TCP port for thelocal portal Web service.tcp-port port-numberBy default, the HTTP servicelistening port number is 80 and theHTTPS service listening portnumber is 443.Specifying a portal authentication domainAbout portal authentication domainsAn authentication domain defines a set of authentication, authorization, and accounting policies.Each portal user belongs to an authentication domain and is authenticated, authorized, andaccounted in the domain.With an authentication domain specified on an interface, the device uses the authentication domainfor AAA of portal users. This allows for flexible portal access control.Restrictions and guidelines for specifying a portalauthentication domainThe device chooses an authentication domain for each user in the following order:1. The authentication domain specified for portal users.2. The ISP domain in the username.3. The default ISP domain of the device.If the chosen domain does not exist on the device, the device searches for the ISP domain thataccommodates users assigned to nonexistent domains. If no such ISP domain is configured, userauthentication fails. For more information about ISP domains, see "Configuring AAA."
