404Step Command Remarks3. Configure passwordsfor static individualusers.• Configure a password for IPv4static individual users:ip subscriber password{ ciphertext | plaintext } string• Configure a password for IPv6static individual users:ipv6 subscriber password{ ciphertext | plaintext } stringThe default password for a staticindividual user is vlan.Configuring ISP domains for static individual usersThe BRAS selects ISP domains for static individual users in the following order:• Domain configured in the static IPoE session• Service-specific domain• Interface-specific domain• Default system domainFor more information about how to configure a domain in the static IPoE session, see "Configuringstatic IPoE sessions on an interface." For more information about how to configure service-specificISP domains, see "Configuring service-specific ISP domains." For more information about how toconfigure the default system domain, see "Configuring AAA."To configure an interface-specific ISP domain for static individual users:Step Command Remarks1. Enter system view. system-view N/A2. Enter interface view. interface interface-typeinterface-number N/A3. Configure an ISPdomain for staticindividual users.• Configure an ISP domain for staticIPv4 individual users:ip subscriber unclassified-ipdomain domain-name• Configure an ISP domain for staticIPv6 individual users:ipv6 subscriber unclassified-ipdomain domain-nameBy default, static individual usersuse the default system domain.Configuring leased usersLeased user configuration tasks at a glanceTasks at a glance Remarks(Required.) Configuring leased users:• Configuring interface-leased users• Configuring subnet-leased users• Configuring L2VPN-leased usersInterface-leased users, subnet-leasedusers, and L2VPN-leased userscannot be configured on the sameinterface.(Optional.) Configuring ISP domains for leased users N/A
