433Acct start-fail action : OnlineAcct update-fail action : OnlineAcct quota-out action : OfflineMax multicast addresses : 0Multicast address list : N/AQoS:User profile : N/ASession group profile : N/AUser group acl : N/AInbound CAR : N/AOutbound CAR : N/AInbound user priority : N/AOutbound user priority : N/AFlow statistic:Uplink packets/bytes : 16734145/2141970560Downlink packets/bytes : 22314327/2856233728Example: Configuring a VPN DHCP userNetwork configurationAs shown in Figure 152, the host in a VPN accesses the BRAS as a DHCP user. The BRAS performsAAA for the host through the RADIUS server.Figure 152 Network diagramProcedure1. Configure the RADIUS server: (This section uses the Linux Free RADIUS server as anexample.)# Add BRAS IP address 4.4.4.2 and secret radius to the clients.conf file.client 4.4.4.2/32 {ipaddr = 4.4.4.2netmask=32secret=radius}# Add host username, password, VPN, and address pool to the users user information file. Theusername is the host MAC address, the password is radius, the VPN is vpn1, and the addresspool is pool1.000c29a6b656 Cleartext-Password :="radius"Huawei-VPN-Instance :="vpn1",
