28Step Command Remarks3. Set the maximum number ofRADIUS request transmissionattempts.retry retries The default setting is 3.Setting the maximum number of real-time accountingattemptsIf you specify a maximum number of real-time accounting attempts, the device will disconnect usersfrom which no accounting responses are received within the permitted attempts.To set the maximum number of real-time accounting attempts:Step Command Remarks1. Enter system view. system-view N/A2. Enter RADIUS scheme view. radius schemeradius-scheme-name N/A3. Set the maximum number ofreal-time accounting attempts.retryrealtime-accountingretriesThe default setting is 5.Configuring RADIUS stop-accounting packet bufferingThe device sends RADIUS stop-accounting requests when it receives connection teardown requestsfrom hosts or connection teardown commands from an administrator. However, the device might failto receive a response for a stop-accounting request in a single transmission. Enable the device tobuffer RADIUS stop-accounting requests that have not received responses from the accountingserver. The device will resend the requests until responses are received.To limit the transmission times, set a maximum number of transmission attempts that can be madefor individual RADIUS stop-accounting requests. When the maximum attempts are made for arequest, the device discards the buffered request.To configure RADIUS stop-accounting packet buffering:Step Command Remarks1. Enter system view. system-view N/A2. Enter RADIUS scheme view. radius schemeradius-scheme-name N/A3. Set the maximum number ofreal-time accounting attempts.retryrealtime-accountingretriesThe default setting is 5.4. Enable buffering of RADIUSstop-accounting requests towhich no responses have beenreceived.stop-accounting-bufferenableBy default, the buffering feature isenabled.5. (Optional.) Set the maximumnumber of transmissionattempts for individual RADIUSstop-accounting requests.retry stop-accountingretries The default setting is 500.
