H3C SecPath F5020 Installation Manual

Also see for SecPath F5020: Configuration guide Installation, quick start Manual Interface configuration guide

Contents

H3C SecPath F5020 Installation Manual Manual pdf 31 page image

24Accessing the device for the first timeSetting up the configuration environmentTo access the device for the first time, you can log in to the device from the console port or Webinterface. To set up the configuration environment, see "Logging in from the console port" and"Logging in from the Web interface," respectively.Powering on the deviceChecking before power-onWARNING!Locate the emergency power-off switch in the room before powering on the device so you canquickly shut power off when an electrical accident occurs.Before powering on the device, verify the following information:• The power cord and grounding cable are correctly connected.• The power source specifications meet the device requirements.• The console cable is correctly connected, the terminal or PC used for configuration has started,and the configuration parameters have been correctly set.• The interface module (if any) is installed correctly.Powering on the deviceSwitch on the power source of the device.Checking after power-onAfter powering on the device, verify that:• The LEDs on the front panel indicate that the device is operating correctly. For more informationabout LEDs, see "Appendix D LEDs."• The fan blades are rotating and air is exhausted from the air outlet vents.• The configuration terminal displays the following:System is starting...Press Ctrl+D to access BASIC-BOOTWARE MENU...Press Ctrl+T to start heavy memory testBooting Normal Extended BootWareThe Extended BootWare is self-decompressing......Done.***************************************************************************** ** H3C SecPath BootWare, Version 2.01 ** *****************************************************************************