H3C SecPath F5020 Installation Manual

Also see for SecPath F5020: Configuration guide Installation, quick start Manual Interface configuration guide

Contents

H3C SecPath F5020 Installation Manual Manual pdf 8 page image

1Preparing for installationSafety recommendationsTo avoid any equipment damage or bodily injury, read the following safety recommendations beforeinstallation. Note that the recommendations do not cover every possible hazardous condition.Safety symbolsWhen reading this document, note the following symbols:WARNING means an alert that calls attention to important information that if not understood orfollowed can result in personal injury.CAUTION means an alert that calls attention to important information that if not understood orfollowed can result in data loss, data corruption, or damage to hardware or software.General safety recommendations• Make sure the installation location is flat, vibration-free, and away from electromagneticinterferences. ESD and anti-slip measures are in place.• Do not place the device on an unstable case or desk. The device might be severely damaged incase of a fall.• Keep the chassis and installation tools away from walk areas.• Keep the chassis clean and dust-free.• Do not place the device near water or in a damp environment. Prevent water or moisture fromentering the device chassis.• Pay attention to the safety symbols on the package and handle the device accordingly.Table 1 Symbols on the packageSymbol DescriptionThe device shall not be vertically stacked beyond the specified number.Place the device with the arrows up.The device is fragile. Handle it with care.Keep the device from humidity, rains, and wet floor.• Ensure good ventilation of the equipment room and keep the air inlet and outlet vents of thedevice free of obstruction.