H3C WA Series Command Reference Manual

Also see for WA Series: Configuration guide Getting started guide Configuration guide Layer 2 command reference Command reference

Contents

H3C WA Series Command Reference Manual Manual pdf 22 page image

5-1z The models listed in this document are not applicable to all regions. Please consult your local salesoffice for the models applicable to your region.z Support of the H3C WA series WLAN access points (APs) for commands may vary by AP model.For more information, see Feature Matrix.z The interface types and the number of interfaces vary by AP model.5 WLAN Security Configuration Commandsauthentication-methodSyntaxauthentication-method { open-system | shared-key }undo authentication-method { open-system | shared-key }ViewWLAN service template viewDefault Level2: System levelParametersopen-system: Enables open system authentication.shared-key: Enables shared key authentication.DescriptionUse the authentication-method command to select 802.11 authentication method to be used.Use the undo authentication-method command to disable the selected authentication method.By default, open system authentication is enabled.When you use this command to set the authentication method, if the current service template is ofcrypto type, and the encryption mode is WEP, you can set the authentication method to either opensystem or shared key.z If the current service template is of clear type, you can only enable open system authentication.z If the current service template is of crypto type, you can enable open system or shared keyauthentication.