H3C WA Series Command Reference Manual

Also see for WA Series: Configuration guide Getting started guide Configuration guide Layer 2 command reference Command reference

Contents

H3C WA Series Command Reference Manual Manual pdf 23 page image

5-2Examples# Enable the open system authentication. system-view[Sysname] wlan service-template 1 clear[Sysname-wlan-st-1] authentication-method open-system# Enable shared key authentication. system-view[Sysname] wlan service-template 1 crypto[Sysname-wlan-st-1] authentication-method shared-keycipher-suiteSyntaxcipher-suite { ccmp | tkip | wep40 | wep104 | wep128}*undo cipher-suite { ccmp | tkip | wep40 | wep104 | wep128}*ViewWLAN service template view (crypto type)Default Level2: System levelParametersccmp: Enables the CCMP cipher suite. CCMP is an AES-based encryption method.tkip: Enables the TKIP cipher suite. TKIP is an encryption method based on RC4 and dynamic keymanagement.wep40: Enables the WEP-40 cipher suite. WEP is an encryption method based on RC4 and shared keymanagement.wep104: Enables the WEP-104 cipher suite.wep128: Enables the WEP-128 cipher suite.DescriptionUse cipher-suite command to select the cipher suite used in the encryption of frames. The ciphersuites supported are CCMP, TKIP, WEP40, WEP104 and WEP128.Use the undo cipher-suite command to disable the selected cipher suite.By default, no cipher suite is selected.Examples# Enable TKIP cipher suite. system-view[Sysname] wlan service-template 1 crypto[Sysname-wlan-st-1] cipher-suite tkipgtk-rekey client-offline enableSyntaxgtk-rekey client-offline enableundo gtk-rekey client-offline