H3C WA Series Command Reference Manual

Also see for WA Series: Configuration guide Getting started guide Configuration guide Layer 2 command reference Command reference

Contents

H3C WA Series Command Reference Manual Manual pdf 73 page image

9-11Examples# Bind the MP policy sys_mp to WLAN-Radio 1/0/2. system-view[Sysname] interface WLAN-Radio 1/0/2[Sysname-WLAN-Radio1/0/2] mp-policy sys_mpprobe-request-intervalSyntaxprobe-request-interval interval-valueundo probe-request-intervalViewMesh profile viewDefault Level2: System levelParametersinterval-value: Probe request interval in ms, with an effective range of 100 to 8191.DescriptionUse the probe-request-interval command to configure the probe request interval.Use the undo probe-request-interval command to restore the system default.By default, the probe request interval is 1000 ms.Examples# Set the probe request interval to 500 ms for MP policy sys_mp. system-view[Sysname] wlan mp-policy sys_mp[Sysname-wlan-mp-policy-sys_mp] probe-request-interval 500wlan mesh-profileSyntaxwlan mesh-profile mesh-profile-numberundo wlan mesh-profile mesh-profile-numberViewSystem viewDefault Level2: System levelParametersmesh-profile-number: Mesh profile number, which ranges from 1 to 32.DescriptionUse the wlan mesh-profile command to create a mesh profile and enter mesh profile view.Use the undo wlan mesh-profile command to delete the specified mesh profile.