1-2Number Of Frames Discarded : 0Table 1-1 Description on the fields of the display garp statistics commandField DescriptionNumber of GVRP Frames Received Number of the GVRP frames received on theportNumber of GVRP Frames Transmitted Number of the GVRP frames transmitted throughthe portNumber of Frames Discarded Number of GVRP frames discarded by the portdisplay garp timerSyntaxdisplay garp timer [ interface interface-list ]ViewAny viewParametersinterface-list: Specifies a list of Ethernet ports of which the GARP timer settings are to be displayed. Inthis list, you can specify individual ports and port ranges. An individual port takes the form ofinterface-type interface-number and a port range takes the form of interface-type interface-number1 tointerface-type interface-number2, with interface-number2 taking a value greater thaninterface-number1. The total number of individual ports and port ranges defined in the list must notexceed 10.DescriptionUse the display garp timer command to display the settings of the GARP timers on specified ports orall ports.If the interface interface-list keyword-argument combination is not specified, this command displaysthe GARP timer settings of all ports.This command displays the settings of the following timers:z Join timerz Leave timerz LeaveAll timerz Hold timerRelated commands: garp timer, garp timer leaveall.Examples# Display the settings of the GARP timers on port Ethernet1/0/1. display garp timer interface Ethernet 1/0/1GARP timers on port Ethernet1/0/1Garp Join Time : 20 centiseconds
