1-8interface Ethernet1/0/22#interface Ethernet1/0/23#interface Ethernet1/0/24#interface GigabitEthernet1/1/1#interface GigabitEthernet1/1/2shutdown#interface GigabitEthernet1/2/1#interface GigabitEthernet1/2/2shutdown#TOPOLOGYCFG. MUST NOT DELETE#GLBCFG. MUST NOT DELETE#interface NULL0#user-interface aux 0user-interface vty 0 4authentication-mode noneuser privilege level 3#returnThe configuration information output above in turn is the system configuration, logical interfaceconfiguration, physical port configuration, and user interface configuration.display startupSyntaxdisplay startup [ unit unit-id ]ViewAny viewParametersunit unit-id: Specifies the unit ID of a switch. It only can be 1.DescriptionUse the display startup command to display the startup configuration of a switch.Related commands: startup saved-configuration.Examples# Display the startup configuration file information of the current switch. display startup
