1-3Field DescriptionMODEPoE mode on the port:z signal: PoE through the signal cablez spare: PoE through the spare cablePRIORITYPoE priority of the port:z critical: Highestz high: Highz low: LowSTATUSPoE status on the port:z user command set port to off: PoE to the port is turned off by the userz Standard PD was detected: A standard PD is detectedz Legacy PD was detected: A non-standard PD is detectedz PD detection is in process: PDs are being detectedz If the poe enable command is configured on a port, and the port is notconnected to a standard PD (for example, a PC), “ non-standard PDconnected” will be displayed.display poe interface powerSyntaxdisplay poe interface power [ interface-type interface-number ]ViewAny viewParameterinterface-type interface-number: Port type and port number.DescriptionUse the display poe interface power command to view the power information of a specific port of theswitch. If the interface-type interface-number argument is not specified, the command displays thepower information of all ports of the switch.Example# Display the power information of Ethernet 1/0/10. display poe interface power Ethernet1/0/10Port power :12400 mW# Display the power information of all ports. display poe interface powerPORT INDEX POWER (mW) PORT INDEX POWER (mW)Ethernet1/0/1 0 Ethernet1/0/2 0Ethernet1/0/3 0 Ethernet1/0/4 0Ethernet1/0/5 0 Ethernet1/0/6 0Ethernet1/0/7 0 Ethernet1/0/8 0Ethernet1/0/9 0 Ethernet1/0/10 12400……
