1-2Example# Display the information about the management VLAN interface. (Assume that VLAN 1 is themanagement VLAN.) display interface Vlan-interface 1Vlan-interface1 current state : DOWNLine protocol current state : DOWNIP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e256-ae10Internet Address is 192.168.0.39/24 PrimaryDescription : Vlan-interface1 InterfaceThe Maximum Transmit Unit is 1500Table 1-1 Description on the fields of the display interface Vlan-interface commandField DescriptionVlan-interface current state Current state of Vlan-interface1Line protocol current state Current state of the link layer protocolIP Sending Frames' Format Format of the sent IP packetsHardware address MAC address corresponding to the managementVLAN interfaceInternet Address Primary Primary IP addressDescription Description string assigned to the VLANinterfaceThe Maximum Transmit Unit The maximum transmit unit (MTU)display ip interfaceSyntaxdisplay ip interface [ Vlan-interface vlan-id ]ViewAny viewParametervlan-id: ID of the management VLAN interface.DescriptionUse the display ip interface command to display the information about a specified VLAN interface.Example# Display the information about VLAN-interface 1. display ip interface Vlan-interface 1Vlan-interface1 current state :UPLine protocol current state :UPInternet Address is 192.168.0.39/24 PrimaryBroadcast address : 192.168.0.255
