HAI OMNI IIe Owner's Manual

Also see for OMNI IIe: Installation manual Installation

Contents

HAI OMNI IIe Owner's Manual Manual pdf 30 page image

Page 22Unit NumbersOmni IIe systems have 128 total Unit Numbers. They consist of HLC, UPB, Z-Wave, CentraLite, RadioRA, ALC, Compose, andX-10 module unit numbers, hardwire voltage output unit numbers, and internal flag unit numbers as follows:Omni IIeUnit Numbers Module / Output Unit Numbers1 - 16 HLC or Z-Wave Room 1 and 2, UPB Unit ID 1-16, Z-Wave Node ID 1-16, CentraLite loads 1-16,RadioRA Lighting Zones and Master Controls 1-16, or X-10 modules 1 – 16 (House Code X)17 - 32 HLC or Z-Wave Room 3 and 4, UPB Unit ID 17-32, Z-Wave Node ID 17-32, CentraLite loads 17-32,RadioRA Lighting Zones and Master Controls 17-32, or X-10 modules 1 – 16 (House Code X+1)(1 - 31) ALC addresses 1-31, Branch 1 *33 - 48 HLC or Z-Wave Room 5 and 6, UPB Unit ID 33-48, Z-Wave Node ID 33-48, CentraLite loads 33-48,RadioRA Lighting Zones and Master Controls 33-48, or X-10 modules 1 – 16 (House Code X+2)49 - 64 HLC or Z-Wave Room 7 and 8, UPB Unit ID 49-64, Z-Wave Node ID 49-64, CentraLite loads 49-64,RadioRA Lighting Zones and Master Controls 49-64, or X-10 modules 1 – 16 (House Code X+3)(33 – 63) ALC addresses 1-31, Branch 2 *65 - 72 Voltage Outputs (1-8), Fully Configurable73 – 128 Internal Flags“X” Represents the House Code setting on the Omni IIe Controller“*” If usedScrolling Through NamesThe Omni IIe stores names for Units, Zones, Buttons, Codes, Temperatures, and Messages so that you don't have to rememberthat "UNIT 5" is the "DEN LIGHT" and "ZONE 1" is the "FRONT DOOR". In general, any time you enter a unit, zone, button,code, temperature, or message number, you can press the down arrow key to display its name, then use the up and down arrowkeys to scroll through the list of other names. This is true when entering commands and programming on the console. Onlynamed items are displayed on an OmniTouch touchscreen.Controlling UnitsThe control menu is used when controlling lights and appliances. To enter the control menu, from the top-level display or fromthe main menu, press the 1 (CTRL) key on the console keypad. Omni IIe will automatically display the first named item in thatlist. The down arrow key can then be used to scroll through the list, and the ' # ' key is used to select the item. If the specific itemnumber is known, enter the item number followed be the ' # ' key, or scroll up and down among the named items.After the unit has been selected, press the ' # ' key. The console will display:Controlling a Room of HLC LightingLiving Room0=OFF 1=ON 2-5=A-D ↓Living Room6=SET #=STA↑¾ Press 0 (OFF) to turn the selected room off (all lighting loads in the room are turned off).¾ Press 1 (ON) to turn the selected room on (all lighting loads in the room are turned on).¾ Press 2 (A) to set all of the lighting loads in the selected room to their preset levels for Scene A.¾ Press 3 (B) to set all of the lighting loads in the selected room to their preset levels for Scene B.¾ Press 4 (C) to set all of the lighting loads in the selected room to their preset levels for Scene C.¾ Press 5 (D) to set all of the lighting loads in the selected room to their preset levels for Scene D.¾ Press 6 (SET) to set up a lighting scene for the all of the lighting loads in the selected room (On, A-D).¾ Press # (STA) to view the current status of the room.