Hach sc200 User Manual

Also see for sc200: Quick guide Software update Basic user manual User manual User manual

Hach sc200 User Manual Manual pdf 30 page image

Option DescriptionSet Date/Time Sets the controller time and date (refer to Update thedate and time on page 36)Datalog setup Configures data logging options. Available only ifCalculation has been setup. At least one sensor mustbe attached to enter a calculation (refer to Set thedatalog mode and interval on page 37)Manage Data Select the device from the list of installedcomponents to view the data or event logError Hold Mode Hold Outputs—Holds outputs at last known valuewhen controller loses communication with thesensor.Transfer Outputs—Switches to transfer mode whencontroller loses communication with the sensor.Outputs transfer to a pre-defined value.Calculation Configures the controller math function (refer to Setup a calculation on page 37)sc200 Information S/W VER:—Displays the current version of controllersoftwareBootloader VER:—Displays the current Bootloaderversion. The Bootloader is a file that loads the mainoperating system for the controllerS/N:—Displays the controller serial numberVersion:—Displays the current version of controllerhardwareDiscrete Input Setup Configures three discrete input channels (refer to Setup the discrete inputs on page 37)Language Assigns the language used in the controller (refer toUpdate the display language on page 38)2. Select an option and push ENTER to activate the menu item.Advanced operationSecurity setupEnable or disable the passcodeBy default the passcode option is disabled and all configuration settingsand calibrations can be changed. When the passcode function isenabled, access to Sensor calibration and Test/Maint menus requires apasscode.To enable the passcode:1. From the Settings Menu, select sc200 Setup and push the ENTERkey.2. Select Security Setup and push the ENTER key.3. Select Set Passcode and push the ENTER key.4. Select Disabled or Enabled and push the ENTER key.The passcode is enabled.5. Push the BACK key to return to the sc200 Setup Menu, or push theMENU key to return to the Settings Menu.Edit the passcodeThe passcode is factory set to SC200. The Edit Passcode menu optionappears in the Security Setup menu only after the passcode feature isenabled and a valid passcode has been entered.A passcode consists of up to six upper or lower-case alpha, numeric andspecial characters. Passcodes are case-sensitive.To edit the passcode:1. Make sure the passcode is enabled. Refer to Enable or disable thepasscode on page 24 for information on how to enable the passcode.2. From the Settings menu, select Security Setup and push ENTER.3. Use the arrow keys to enter the current valid passcode and pushENTER.The Edit Passcode option appears in the Security Setup menu.4. Select Edit Pass Code and push ENTER.The Edit Pass Code screen appears.5. Use the arrow keys to edit the passcode and push ENTER.24 (nglisK