Hach sc200 User Manual

Also see for sc200: Quick guide Software update Basic user manual User manual User manual

Hach sc200 User Manual Manual pdf 44 page image

6. Select a warning option and push ENTER.Option DescriptionOff An active discrete input does not trigger a device warning.On An active discrete input triggers a device warning.7. Select an output mode option and push ENTER.Option DescriptionActive Output level continues to represent operating conditions.Hold Output level is held static.Transfer Output level moves to a pre-configured value.8. Select the sensors that will have their outputs (analog and relay)affected when one of the discrete inputs becomes active. PushENTER.9. Use the arrows to select the On Delay value (the duration time delaybetween the discrete input activation and the configured response ofthe controller). Push ENTER.10. Use the arrows to select the Off Delay value (the duration time delaybetween the discrete input de-activation and the configured responseof the controller). Push ENTER.11. Repeat steps 4–10 for each desired channel.12. If a discrete input needs to be changed after initially set up:a. Repeat steps 1–4 and an Input Settings menu appears with thefollowing options:• Control Logic• Set Warning• Output Mode• On Delay• Off Delayb. Select the desired option and push ENTER.c. Make the desired changes and push ENTER to save the changesand return to the Inputs Setting menu.Update the display languageThe display language can be changed through the Setup menu.1. From the Settings Menu, select sc200 Setup and push ENTER.2. Select Language and push ENTER.The list of language options appears. English is the default languagefor the controller.3. Highlight the language to be used for the controller and pushENTER.The selected language is saved and is used for the controller display.The display returns to the sc200 Setup menu.Using the secure digital memory (SD) cardAn SD card must be installed in the controller.• The SD card can be used to update software and firmware and todownload event and data logs. If the SD card is installed while thecontroller is in the Settings Menu, push the HOME key and then theMENU key to verify the option is visible. The SD icon will also bevisible in the upper status bar of the main measurement screen whena card is installed.• Data log files on the SD card are available in XML and binary formats.• DataCom is used to convert files from binary to CSV format. Refer tothe DataCom manual for more information on how to use theapplication. For a copy of the DataCom manual, software updates orother downloadable resources, go to http://www.hach-lange.com orhttp://www.hach.com. Search 'ataCoP or go to any sc200 productpage.38 (nglisK