Hach sc200 User Manual

Also see for sc200: Quick guide Software update Basic user manual User manual User manual

Hach sc200 User Manual Manual pdf 42 page image

Figure 25 Frequency control function1 High limit 5 Cycle duration2 Deadband 6 Time (x-axis)3 Setpoint 7 Selected source (y-axis)4 Low limit• Warning FunctionOption DescriptionWarning Sets the level for warning activation. Refer to the sensor manualfor the numbers for individual warning messages.Display setupConfigures the controller display.1. From the Settings menu, select sc200 Setup and push ENTER.2. Select Display Setup and push ENTER.Option DescriptionAdjustOrderView and modify the measurement display order.• See Current Order—View the current display order• Add Measurements—Add selected measurements to thedisplay• Remove Measurements—Remove selectedmeasurements from the display• Reorder List—Select one or more measurements andchange their order in the display• See Default Order—View the default display order• Set to Default—Set the display order to the defaultconfiguration1ote SoPe of tKe aEove Zill not Ee availaEle if no adMustPentis possiEle for tKat option e.g. 5eorder /ist and 5emove0easurements Zill not Ee availaEle if only one PeasurePentis selected for display .DisplayContrastAdjust the contrast to a value between the minimum of +1 andthe maximum of +9Edit Name Assigns a name to the controllerUpdate the date and time1. From the Settings menu, select sc200 Setup and push ENTER.2. Select Set Date/Time and push ENTER.3. Select Date Format from the Set Date/Time screen and pushENTER.4. Select a format and push ENTER.5. Select Date/Time from the Set Date/Time screen and push ENTER.6. Update the entries.a. Use the right and left arrow keys to highlight a field.b. Use the up and down arrow keys to change the values in the fieldand push ENTER.36 (nglisK