Haier AF072XCBAA Operation And Installation Manual

Also see for AF072XCBAA: Service manual Service manual

Contents

20Installation Manual of Room Air ConditionerElectric wiring :When connecting indoor and outdoor wire, check the number on indoor and outdoor terminalblocks. Terminals of same number and same color shall be connected by the same wire.Incorrect wiring may damage air conditioner's control or cause operation failure.Note:NLR RW B Y/GQPTO POWER SUPPLY(1PH,220-230V~,50Hz)CONNECT TOOUTDOOR UNITProcess of wire connections1. Loop terminalAfter removing the screw, fix the wire ring on the screw, reinsert the screw into theblock terminal and then tighten the screw.2. Straight terminalAfter loosening the screw, inset the wire end into the block terminal and then tightenthe screw. Slightly pull the wire to see if it is tightly fixed.3. Wire cappingAfter completion of connection, capping clips must beapplied on the external sleeve of the wires.Wiring diagram:Wiring of indoor unitRemove air intake screen and take out the front wires.Connect the wires as specified in the abovemethods and diagrams for indoor unit and wire con-nections.Properly apply capping clips on the wires.Replace the air intake screen.Do not link the connecting and signal wire with thesame cable, a snug space must be maintainedbetween connecting and signal wires.Shield of the signal wire should be spot grounded.Block terminalCapping clipWiring diagram of loop terminals1(L)

/ 23

Related manuals for Haier AF072XCBAA