Harbor Breeze E-BDB52ABZC5BC4N Owner's Manual

Contents

Harbor Breeze E-BDB52ABZC5BC4N Owner's Manual Manual pdf 10 page image

DOWNROD STYLE FAN MOUNTINGIf you decided to cut back the lead wires in Step4, strip 1/2 in. of insulation from end of whitewire. Twist stripped ends of each strand of wirewithin the insulation with pliers (not included).(Fig. 5) Repeat Step 5 for black, blue (ifapplicable) and green wires.55.Install ball end of downrod (A) into mountingbracket (C) opening. Align slot in ball with tab inmounting bracket (C). (Fig. 6)DANGER: Failure to align slot in ball with tabmay result in serious injury or death.6.Continue to "Wiring" instructions on page 12.6SlotTabCARemove canopy cover from bottom of canopy (B).(Fig. 1) [Note: It may be necessary to use thehandle end of a screwdriver (not included) toremove the canopy cover by tapping on thecanopy cover from the inside of the canopy (B).]*Helpful Hint: Closemount style mounting ismore suitable for ceilings lower than 8 ft. (2.44 m)high. The downrod (A), hanging ball, and canopycover are not used in this type of installation.CLOSEMOUNT STYLE FAN MOUNTING1.CanopyCoverB110