Harbor Breeze E-BDB52ABZC5BC4N Owner's Manual

Contents

Harbor Breeze E-BDB52ABZC5BC4N Owner's Manual Manual pdf 14 page image

PP141. Temporarily lift canopy (B) to mounting bracket(C) to determine which two canopy mountingscrews (P) in mounting bracket (C) align withslotted holes in canopy (B) and partially loosenthese two canopy mounting screws (P).Remove the other two canopy mounting screws(P). Now, lift canopy (B) to mounting bracket(C) again, aligning slotted holes in canopy (B)with loosened canopy mounting screws (P) inmounting bracket (C). Twist canopy (B) to lock.Re-insert the two canopy mounting screws (P)that were just removed and tighten all canopymounting screws (P) securely. (Fig. 1)1BAlign the three blade screws (U), pre-installed onthe blade arm (H), with the three holes in theblade (G). Press up on the blade arm (H) firmly sothat the blade screws (U) come through the holesin the blade (G). Be careful not to use so muchforce that the blade arm (H) bends. (Fig. 2)Repeat for each blade arm (H).Place the plastic locking mechanism (E) on theopposite side of the blade (G) as the blade arm(H), refer to Fig. 2, with the narrower end of theplastic locking mechanism (E) toward the end ofthe blade (G) and against the blade arm screw(U) as shown in Fig. 3. [Please note the side ofthe plastic locking mechanism (E) indicatingTHIS SIDE UP.] Rotate plastic lockingmechanism (E) to the left (counterclockwise) tolock plastic locking mechanism (E) into place.Repeat Step 3 for each blade (G).2.3.HUGE23EGFINAL INSTALLATIONU