WIRINGWARNING: To reduce the risk of fire, electricalshock, or personal injury, wire connectors providedwith this fan are designed to accept only one12-gauge house wire and two lead wires from thefan. If your house wire is larger than 12-gauge orthere is more than one house wire to connect to thetwo fan lead wires, consult an electrician for theproper size wire connectors to use.CAUTION: Be sure outlet box is properly groundedand that a ground (green or bare) wire is present.WARNING: If house wires are different colorsthan referred to in the following steps, stopimmediately. A professional electrician isrecommended to determine wiring.1AFAN AND LIGHT CONTROLLED BY PULL CHAINSBLACKWHITEGROUND/GREEN (BARE)WHITEBLUEWHITEFROM FAN120 V PowerFROMCEILINGFANGREENBLACKGREENChoose wiring diagram (Fig. 1A, Fig. 1B or Fig. 1C)that fits your situation and make appropriate wiringconnections as follows: [NOTE: For each wireconnection below, use one of the wire connectors(AA) provided, making sure to screw wireconnector (AA) on in a clockwise direction.]1A. FAN AND LIGHT CONTROLLED BY PULLCHAINS: Connect BLACK and BLUE wire fromfan to BLACK wire from ceiling. Connect WHITEwire from fan to WHITE wire from ceiling.Connect all GROUND (GREEN) wires togetherfrom fan (on downrod (A) and mounting bracket(C)) to BARE/GREEN wire from ceiling. (Fig. 1A)1.WHITEBLACKBLACK (WALL SWITCH)GROUND/GREEN (BARE)BLACKBLUEWHITEFROM FANFAN120 V PowerFROMCEILINGGREENWHITEGREEN1BFAN CONTROLLED BY PULL CHAIN, LIGHT BYWALL SWITCH1B. FAN CONTROLLED BY PULL CHAIN,LIGHT BY WALL SWITCH: If you intend tocontrol the fan light with a separate wall switch,connect BLACK wire from fan to BLACK wirefrom ceiling. Connect BLUE wire from fan to theBLACK wire from the independent wall switchfor the light. Connect WHITE wire from fan toWHITE wire from ceiling. Connect all GROUND(GREEN) wires together from fan (on downrod(A) and mounting bracket (C)) toBARE/GREEN wire from ceiling. (Fig. 1B)12