Harman Kardon AVR347 Service Manual

Also see for AVR 347: Brochure & specs Catalog Software upgrade instructions Worksheet Owner's manual

INSTALLATIONSource Device Type AVR 347 Source Input Audio Connections Video ConnectionsVCR, DVR, PVR, Video 1 • Video 1 Analog (inputs and outputs) • One of Component Video 2, Video 1 S-videoTiVo or other and or Video 1 Composite Video Inputaudio/video recorder • Any one available coaxial or optical digital, • For recording, use Video 1 S-video oraudio input, with corresponding coax Composite Video Output, and do not useor optical digital output component video connections at allCable TV, satellite TV, Video 2 • Video 2 Analog Inputs and • One of Component Video 3, Video 2HDTV or other • Optical 1 Input S-video or Video 2 Composite Video Inputdevice that deliverstelevision programsTV or other audio/video Video 3 • Video 3 Analog Inputs and • Video 3 S-video or Video 3 Compositedevice (only when used • Any one available coaxial or optical Video Inputas a source) digital audio input • Not required if source is a TVTV, game console, Video 4 (front-panel jacks) • Video 4 Analog Inputs and • Video 4 S-video or Video 4 Composite Videocamera or other • Either Coax 3 or Optical 3 Input Inputaudio/video device • Not required if source is a TVDVD Audio/Video, DVD • DVD Analog Inputs • Component Video 1 InputSACD, HD-DVD, • 6-/8-Channel Inputs (optional) andBlu-ray Disc • Coax 1 InputHDMI-capable DVD HDMI 1 • HDMI 1 Input • HDMI 1 InputAudio/Video or HD-DVD • 6-/8-Channel Inputs (optional)player or other audio/video deviceHDMI-capable DVD HDMI 2 • HDMI 2 Input • HDMI 2 InputAudio/Video or HD-DVD • 6-/8-Channel Inputs (optional)player or other audio/video deviceCD player CD • CD Analog Inputs and • Not required• Any one available coaxial or opticaldigital audio inputCDR, MiniDisc, Tape • Tape Analog (inputs and outputs) and • Not requiredcassette • Any one available coaxial or optical digital,audio input, with corresponding outputor optical digital outputTable 2 – Recommended Source Component ConnectionsFor each video source, select one type of video connection. HDMI videois preferred, but both your source device and your video display musthave this type of video capability. If either device does not, then usecomponent video, S-video or composite video.Referring to Table 2, we recommend that you connect the DVD sourceto the Component Video 1 inputs, the Video 1 source to the ComponentVideo 2 inputs, and the Video 2 source to the Component Video 3 inputs.Any HDMI-capable source devices should be connected to one of thetwo HDMI inputs. All other source devices should be connected to eitherthe component, S- or composite video input for that source. However,you may make whatever video connections are best for your system.NOTE: It’s possible for a source to use none of the connectionsnamed for that source. For example, you might connect yourDVD player to the Component Video 1 inputs and the Coax 1digital audio input. However, we will refer to this source as“DVD,” and in the Initial Setup section you will program thereceiver so that these connections are assigned to the DVDsource. When you select “DVD” as your source using the frontpanel or the remote, the correct connections for your DVDplayer will be used.We recommend connecting your various sources using the connectionsshown in Table 2 (below) in order to simplify programming your receiverand remote control. However, you may connect any device to anysource input.AVR347 harman/kardon19