Harman Kardon DMC 1000 Owner's Manual

Also see for DMC 1000: Brochure & specs Catalog Owner's manual Datasheet Owner's manual

Harman Kardon DMC 1000 Owner's Manual Manual pdf 24 page image

Video Noise Reduction: We recommend that you leave this settingat the default “Off”. If video signal noise is observed when using theanalog video outputs, turn this setting on to reduce the noise andimprove the picture quality.Step Seven – General SetupThese general system settings should be accessed with caution.See Figure 22. If you are uncertain about the proper setting forany of these options, consult with your dealer or installer, or contactHarman Kardon Customer Service at www.harmankardon.com.Figure 22 – General Setup MenuSoftware Update: When system software updates are released, thissetting will be used during the installation process. Do not make anychanges here unless instructed to do so.Date & Time: The first time the DMC 1000 is used, set the local timeand date here.System Information: This setting displays the software version numberand the amount of hard-disc space available. It is informational only.Step Eight – Advanced SetupThe settings shown in Figure 23 should be used with caution. If you haveany doubts about whether it is appropriate to change these settings, con-sult with your Harman Kardon dealer or custom installer.Figure 23 – Advanced Setup MenuBackup: This setting is used to back up the system and Media Librarycontents to a USB storage device.Restore: This setting is used to restore a backup copy of the systemsettings and Media Library contents. The existing contents of the MediaLibrary will be erased. Use this feature only in the unlikely event thatthe hard-disc drive in your DMC 1000 has been replaced.Reset Factory Defaults: This setting is used to return all of the Setup Menusettings to their factory defaults. They will then have to be reconfiguredas required for your application. The contents of the Media Library arenot affected by this command.Network: When the DMC 1000 is connected to a network, the networksettings are identified here. These settings may be used with other deviceswhen the DMC 1000 is to be used as a media server as part of a homenetwork. This feature also allows you to test the network connection to makecertain that Internet access is available. Press the “9” key on the remotetwice, to display the Internet Protocol (IP) address on the front panel.Language Selected: Select the display language for the DMC 1000’s menushere. Choose from the default English, or Spanish, French, German or Italian.Format USB: This command allows you to reformat a USB device, whichcompletely erases the contents of the drive. Exercise great caution beforereformatting a drive.Now that your DMC 1000 has been installed and configured, it’s easyto enjoy your favorite audio and video programs from a variety of media,including DVDs, CDs, memory cards, USB drives and the DMC 1000’sown Media Library.24INITIAL SETUP