Chapter 7 Device Configuring Using EMS Device Management© 2012 Harmonic Inc. 150 ProView 7000 v.2.6, Rev. E7.10.8 Backing Up/Restoring the Device ConfigurationThe Back Up / Restore Configuration dialog enables the EMS user to manage theconfiguration of the ProView 7000™ device.This dialog enables the EMS user to back up the current device configuration and keep it forfuture use, to restore a backed-up device configuration and to restore the factory defaultdevice configuration.When restoring a saved or factory/default configuration, make sure the current hardware andlicensed software of the device match the device configuration when the configuration wasbacked up. If in doubt, consult Harmonic support.Figure 7–36: Backup and Restore Configuration dialog7.10.8.1 Backing Up the Current ConfigurationTo back up the current configuration:1. Select the device in the Devices box.2. Select Tools > Back Up / Restore Configuration… in the ProView 7000™ EMS menu bar.The Back Up and Restore Configuration dialog displays, see Figure 7–36.3. Enter a configuration identification name in the Backup Device section of the dialog.4. Select the path where to backup the configuration.5. Click Back Up.A message reports successful save of the configuration.
