© 2012 Harmonic Inc. 63 ProView 7000 v.2.6, Rev. EChapter 6Remote Management using EMSThe ProView 7000™ EMS application provides a GUI for easy remote management ofProView 7000™s.Topics:■ Configuring the IP Parameters■ EMS System Requirements■ Installing EMS■ Launching EMS■ Adding a Device■ Connecting a Device■ Checking Device Connectivity■ Disconnecting a Device■ Removing a Device■ Displaying the Device Explorer■ EMS GUI Structure■ Manipulating EMS GUI Components■ Refreshing the EMS Screen6.1 Configuring the IP ParametersBefore you can manage a ProView 7000™ remotely, you must configure the IP parameters.To configure the IP parameters of a ProView 7000™:1. Press Enter on the keypad.The root menu displays.2. Navigate Unit > Management Port > IP Configuration.3. Set the IP Address, Subnet Mask and Default Gateway for the port.4. After any change in the IP configuration, the Apply port changes item is added to the IPConfiguration sub-menu to allow confirmation of the port setup.IP Configuration1 IP Address 127.000.000.0102 Subnet Mask 255.255.255.0003 Default Gateway 000.000.000.000
