Chapter 4 Element Management System (EMS) ProView 7000 EMS Structure© 2011 Harmonic Inc. 43 ProView 7000 v.2.4, Rev. AThe Alarms tab displays all the alarms received by the EMS from the ProView 7000 devices.Figure 4–2: Alarm tabTo refresh the alarm list on demand:1. Right-click any alarm in the list.2. Select Refresh Alarms.The information provided for each alarm displayed consists of the following:■ Alarm Severity – The alarm severity level.The alarm severity color codes are:❑ Critical ( red)❑ Major ( orange)❑ Warning ( yellow)■ Time – Alarm generation date and time (yyyy-mm-dd hh:mm:ss format).■ Device Name and IP – The identification name and IP address of the ProView 7000 devicewhich have raised the alarm.■ Description – The alarm identification and description information.NOTE: Right-click any alarm in the Alarms tab to display a pop-up menu with options for:■ Refresh: refreshes the alarms or the entire EMS (for details, refer to 4.7 Refreshing the EMS Screen).■ Properties: displays the alarm detailed information (for details, refer to 4.1.4.1 Alarm Properties).To display an alarm’s properties:1. Right-click an alarm in the list.2. Select Properties.