Chapter 4 Element Management System (EMS) ProView 7000 EMS Menu Bar© 2011 Harmonic Inc. 49 ProView 7000 v.2.4, Rev. A4.2.4 Tools MenuThe Tools menu allows the user to directly access tools in the system.The Tools menu consists of the following items:Table 4–4: Tools Menu ItemsItem DescriptionPing… Opens the device connectivity status (by pinging the device). For details,refer to 4.3.3.6 Checking Device Connectivity (Pinging the Device).Reboot Device Performs a soft-reset for the selected device.Reset CAM Slot Resets the marked CAM Slot in the Physical Input Port box.NOTE: Active only when a CAM Slot is selected.Manage Presets… Use this menu to manage several configurations, see 4.3.3.7 ManagePresets.Back Up / RestoreConfiguration…Displays the ProView 7000 Back Up / Restore Configuration dialog. Fordetails, refer to 4.3.3.8 Backing Up/Restoring the Device Configuration.Device Identification BlinkingLight…Enables you to turn the device front panel light on/off.Restore Default Passwords… Displays the ProView 7000 Password manager dialog. For details, refer to4.3.3.9 Restoring the Factory/Default Device Access Passwords.GbE Mode… Displays the Set GbE Mode dialog. Use this dialog to set the GbE mode toIn 1 or Out. See 4.3.3.10 GbE Mode on page 63 for details.1. Data IP in requires a license.Firmware Displays sub-menu items:■ Set Active Software Version… – Displays the Set Active SoftwareVersion dialog to select the active software for the device. For details,see E.1 Active Version Management.■ Software Upgrade Manager… – Displays the Software UpgradeManager dialog to perform software upgrading on the devicesmanaged by the EMS. For details, see E.2 Software UpgradeManager.
