82004 -q Perform the following under Windows 98.NOTE: If an operating system other than MicrosoftWindows 98 is installed, the program screensand icons may differ from these instructions.1. Start Microsoft Windows 98.2. Select the Start icon.3. Select Settings, then select Control Panel.4. Select the Sound icon.5. In the Sound window, select chimes from the Namesfield. (To test other adapter card software, select anaction from a menu in that software.)005 - IS THE PREVIEW BUTTON, OR ACTION IN OTHERSOFTWARE, SELECTABLE ON THE SCREEN(SHOWN IN BLACK AND NOT GRAY)? (YES, GOTO STEP 006. NO, READ AHEAD.)q Make sure that Windows 98 is properly installed.q Go to step 001.006 -q Select the Preview button from the Sound window.007 - DO YOU HEAR ANY SOUND FROM THE SPEAKER?(YES, READ AHEAD. NO, GO TO STEP 008.)q The audio feature is functioning normally. Click Cancelto close the dialog box. Exit Microsoft Windows 98.q If the symptom remains or has changed, go to “Index ofSymptoms, Messages, Error Codes, or Beeps” on page59.q End.008 -q Make sure that the volume control is not turned low.q Make sure that the speaker and its adapter are notdamaged.q Make sure that the speaker is plugged in speak-out jack.Refer to the connectors and functions illustrated inchapter 5.q If the error cannot be resolved, replace the systemboard.q End.
