IBM 71412RU User Manual

Also see for 71412RU: Brochure & specs

Contents

Use LSI Logic MegaRAID Storage Manager program to monitor and managethe disk-array subsystem after you install the operating system. Forinformation about using this program, see “Using the LSI Logic MegaRAIDStorage Manager program” on page 75.Using the Configuration/Setup Utility programUse the Configuration/Setup Utility program to perform the following tasks:v View configuration informationv View and change assignments for devices and I/O portsv Set the date and timev Set and change passwordsv Set the startup characteristics of the server and the order of startup devicesv Set and change settings for advanced hardware featuresv View and clear error logsv Change interrupt request (IRQ) settingsv Define when the memory scrubbing feature performs a system memory testv Resolve configuration conflictsStarting the Configuration/Setup Utility programTo start the Configuration/Setup Utility program, complete the following steps:1. Turn on the server.2. When the prompt Press F1 for Configuration/Setup is displayed, press F1. Ifyou have set both a power-on password and an administrator password, youmust type the administrator password to access the full Configuration/SetupUtility menu. If you do not type the administrator password, a limitedConfiguration/Setup Utility menu is available.3. Select settings to view or change.Configuration/Setup Utility menu choicesThe following choices are on the Configuration/Setup Utility main menu. Dependingon the version of the BIOS code, some menu choices might differ slightly fromthese descriptions.v System SummarySelect this choice to view configuration information, including the type, speed,and cache sizes of the microprocessors, type and speed of installed USBdevices, and the amount of installed memory. When you make configurationchanges through other choices in the Configuration/Setup Utility program, thechanges are reflected in the system summary; you cannot change settingsdirectly in the system summary.This choice is on the full and limited Configuration/Setup Utility menu.v System InformationSelect this choice to view information about the server. When you make changesthrough other choices in the Configuration/Setup Utility program, some of thosechanges are reflected in the system information; you cannot change settingsdirectly in the system information.This choice is on the full Configuration/Setup Utility menu only.– Product DataSelect this choice to view the machine type and model of the server, the serialnumber, the revision level or issue date of the BIOS and diagnostics code60 IBM System x3850 M2 and System x3950 M2 Types 7141 and 7233: User’s Guide