- Subnet MaskSelect this choice to set the static subnet mask for the Remote SupervisorAdapter II.- OS USB SelectionSelect this choice to choose the operating system that is used for RemoteSupervisor Adapter II USB support.- <<>>Select this choice to cancel the changes you have made and restore theRemote Supervisor Adapter II settings to the default values.– Baseboard management controller (BMC) settingsSelect this choice to view information and to change baseboard managementcontroller (BMC) settings.- BMC Firmware VersionThis is a nonselectable menu item that displays the BMC firmware version.- BMC Build LevelThis is a nonselectable menu item that displays the BMC firmware buildlevel.- BMC Build DateThis is a nonselectable menu item that displays the BMC firmware builddate.- BMC IPMI VersionThis is a nonselectable menu item that displays the BMC firmware IPMIversion.- BMC POST WatchdogSelect this choice to enable or disable the BMC POST watchdog. Disableis the default setting.- BMC POST Watchdog TimeoutSelect this choice to set the BMC POST watchdog timeout value. 5minutes is the default setting. If the watchdog expires, the server restarts.- System BMC Serial Port SharingSelect this choice to enable or disable the system BMC serial port sharing.Enable is the default setting.- BMC Serial Port Access ModeSelect this choice to set the BMC serial port access mode. Shared is thedefault setting. Select Dedicated for Serial Over LAN operation.- Reboot system on NMISelect Enable to enable the server to restart automatically 60 seconds afterthe service processor issues a nonmaskable interrupt (NMI) to the server. Ifyou disable this option, the server does not restart. Enable is the defaultsetting.- BMC Network ConfigurationSelect this choice to view the BMC network configuration information.v BMC MAC AddressThis is a nonselectable menu item that displays the BMC MAC address.v Host NameSelect this choice to set the BMC host name. The default value is thelower 4 bytes of the MAC address.v DHCP Control64 IBM System x3850 M2 and System x3950 M2 Types 7141 and 7233: User’s Guide
