IBM 8302 Hardware Maintenance Manual

Also see for 8305 - NetVista M42 - 256 MB RAM: User guide Guía del usuario User guide Manual do utilizador Guida per l'utente

Contents

Diagnostic Error Code FRU/Action015-002-XXXUSB port Timeout 1. Remove USB device(s) and re-test2. System board015-015-XXXUSB port External Loopback failure 1. Remove USB device(s) and re-test2. System board015-027-XXXUSB port Configuration/Setup error 1. Flash the system2. System board015-032-XXXUSB port Device Controller failure 1. System board015-034-XXXUSB port bufferallocation failure1. Reboot the system2. Flash the system3. Run memory test4. System board015-035-XXXUSB port Reset condition detected 1. Remove USB device(s) and re-test2. System board015-036-XXXUSB port Register error 1. System board015-040-XXXUSB port IRQ failure 1. Run setup and check for conflicts2. Flash the system3. System board015-195-XXXUSB port Test aborted by user 1. Information2. Re-start the test, if necessary015-196-XXXUSB port test halt, error threshold exceeded 1. Press F3 to review the log file2. Re-start the test to reset the log file015-197-XXXUSB port test warning 1. Make sure the component that is calledout is connected and/or enabled2. Re-run test3. Component that is called out in warningstatement4. Component under test015-198-XXXUSB port test aborted 1. If a component is called out, make sureit is connected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″section015-199-XXXUSB port test failed, cause unknown 1. Go to the ″Undetermined problems″section2. Flash the system and re-test3. Replace component under function test018-000-XXXPCI Card Test Passed 1. No action018-0XX-XXXPCI Card Failure 1. Riser card, if installed2. System boardChapter 7. Symptom-to-FRU Index 97