Flash from Operating System (WinPhlash)Attention:Refer to the information label located inside the system unit cover for any model-specificinformation.1. Click the file link to download the file (24jyNNusa.exe) from the web page.2. When prompted, select a drive and directory in which to save thedownloaded file.3. Click Start, select Find or Search, then click Files and Folders.4. Type 24jyNNusa.exe in the search field, then click Find Now. This will locatethe 24jyNNusa.exe file you just downloaded.5. Double-click the 24jyNNusa.exe icon.6. Click Next. Read the license agreement.7. Click I Agree. The installation folder should beC:\IBMTOOLS\FLASH\24JYnnUS.8. Click Finish. You will be prompted with a message stating ″The specifiedoutput folder does not exist. Create it?″9. Click Yes. You will be prompted with a message stating ″The package hasbeen delivered successfully.″10. Click OK.11. Close all open applications.12. Click Start, then click Run.13. Type C:\IBMTOOLS\FLASH\24JYnnUS\WINPHLASH.EXE.14. Click OK.15. Select Backup BIOS and Flash BIOS with new settings.16. Click Flash BIOS. You will told to save your work and close all otherapplications.17. Click OK. The system will automatically shutdown and restart so that thechanges will take effect.Flash from CD-ROM ISO imageAttention:Refer to the information label located inside the system unit cover for any model-specificinformation.1. Click the file link to download the file (24jyNNusa.exe) from the web page.2. When prompted, select a drive and directory in which to save thedownloaded file.3. Click Start, select Find or Search, then click Files and Folders.4. Type 24jyNNusa.exe in the search field, then click Find Now. This will locatethe 24jyNNusa.exe file you just downloaded.5. Double-click the 24jyNNusa.exe icon.6. Click Next. Read the license agreement.7. Click I Agree. The installation folder should beC:\IBMTOOLS\FLASH\24JYnnUS.266 Hardware Maintenance Manual