IBM 8841 - eServer xSeries 236 Installation Manual

Also see for 8841 - eServer xSeries 236: Option installation guide

Contents

other combination of LEDs, see the Hardware Maintenance Manual andTroubleshooting Guide on the IBM xSeries Documentation CD.AC power LED: This green LED provides status information about the powersupply. During typical operation, both the ac and dc power LEDs are lit. For anyother combination of LEDs, see the Hardware Maintenance Manual andTroubleshooting Guide on the IBM xSeries Documentation CD.Power-cord connector: Connect the power cord to this connector.Ethernet Activity LED: This LED is on the Ethernet connector. When it flashes, itindicates that data is being transmitted or received between the server and thenetwork device that is connected to the connector. The flashing frequency isproportional to the amount of traffic on the network link.ASM: Use this connector to connect the server to an Advanced SystemManagement (ASM) network.Ethernet link status LED: This LED is on the Ethernet connector. When this LEDis lit, there is an active connection on the Ethernet port.Remote Supervisor Adapter II SlimLine Ethernet: Use this connector to connectthe server to an optional Remote Supervisor Adapter II SlimLine installed in anotherserver. This connector is enabled when the Remote Supervisor Adapter II SlimLineoption is installed.28 IBM xSeries 236 Type 8841: Installation Guide