7. Click Next. The “Configuration summary” window opens.8. Review the information that is displayed in the “Configuration summary”window. To change the configuration, click Back.9. Click Apply; then, click Yes when asked if you want to apply the newconfiguration. The configuration is saved in the controller and in the physicaldrives.10. Exit from the ServeRAID Manager program, and remove the CD from theCD-ROM drive.11. Restart the server.Using the PXE boot agent utility programThe Preboot Execution Environment (PXE) boot agent utility program is part of theBIOS code. You can use it to specify the startup order of devices and enable ordisable operating-system wake-up support.Note: The server does not support changing the network boot protocol orspecifying the startup order of devices through the PXE boot agent utility program.Complete the following steps to start the PXE boot agent utility program:1. Turn on the server.2. When the Initializing Intel (R) Boot Agent Version X.X.XX PXE 2.0 BuildXXX (WfM 2.0) prompt appears, press Ctrl+S. You have 2 seconds (by default)to press Ctrl+S after the prompt appears. If the prompt does not appear, use theConfiguration/Setup Utility program to enable the Ethernet PXE/DHCP option.3. Use the arrow keys and press Enter to select a choice from the menu.4. Follow the instructions on the screen to change the settings of the selecteditems; then, press Enter.Figure 3. “Configuration summary” window40 IBM xSeries 236 Type 8841: Installation Guide
